Digital Torque Tester

Tornado Digital Torque Tester

The Tornado is an extremely versatile instrument for measuring low-level torques up to 10 N.m. It provides practical operation, combined with advanced features for testing clockwise and counter-clockwise torques easily and accurately.

The Tornado offers enhanced test functions including;

  • Audible and visual pass/fail alarms
  • On-board memory capable of storing up to 500 readings
  • Tamper-evident closure testing characterizing breakaway torque and tamper-evident ‘bridge’ torque

Key Benefits

  • Four capacities: 1.5 N.m, 3 N.m, 6 N.m & 10 N.m
  • Compact, lightweight and easily portable
  • Mains or battery-powered
  • RS232 output for easy export of results
  • Integrated drip tray captures spillage for easier cleaning
  • Multiple measurement units: mN.m, N.m, lbf.in, ozf.in, kgf.cm, etc
  • Compatible with VectorPro™ Lite data acquisition software
  • On-site calibration available – visit Support & Services for more details

Technical Specifications

  • Clockwise and counter-clockwise measurement
  • Capacities: 1.5, 3, 6 & 10 N.m (13, 26, 50 & 90 lbf.in)
  • Container diameter – 1.5 & 3 N.m models from 10 to 78 mm (0.4″ – 3.1″)
  • Container diameter – 6 – 10 N.m models from 10 to 190 mm (0.4″ – 7.5″)
  • Load accuracy is ±0.5% of full scale
  • 5000 Hz sampling rate

If consistent test speed and reproducibility are a priority, have a look at our Motorised Torque Test Systems.

Orbis Digital Torque Tester

MECMESIN’S SIMPLE, AFFORDABLE MANUAL TORQUE TEST INSTRUMENT

For basic  torque tests up to 6 N.m, the Orbis provides a reliable and accurate solution. The unit boasts a number of useful features designed to maximise usability, making clockwise and counter-clockwise measurements very easy and quick tasks to undertake.

Key Benefits

  • Compact, lightweight and easily portable
  • Mains or battery-powered
  • RS232 output for easy export of results
  • Integrated drip tray captures spillage for easier cleaning
  • Multiple measurement units: mN.m, N.m, lbf.in, ozf.in, kgf.cm, etc
  • Compatible with VectorPro™ Lite data acquisition software
  • On-site calibration available – visit Support & Services for more details

Technical Specifications

  • Clockwise and counter-clockwise measurement
  • Capacity of 6 N.m (50 lbf.in)
  • Container diameter from 10 to 190 mm (0.4″ – 7.5″)
  • Load accuracy is ±0.5% of full scale
  • 5000 Hz sampling rate

If consistent test speed and repeatability are a priority, have a look at our Motorised Torque Test Systems

Child-Resistant Closure Tester

MECMESIN’S DEDICATED TEST INSTRUMENT MEASURING BOTH FORCE AND TORQUE

The CRC tester from Mecmesin, is a highly accurate tester, capable of measuring both the security and accessibility of child-resistant closures. The ‘push’ and ‘twist’ action used to open a CRC closure is shown clearly on two dedicated displays for easy identification of both force and torque values.

Key Benefits

  • Simultaneous display of top-load & release torque
  • Accurate digital force gauge & torque transducer
  • Test to international standards, including: ASTM D3472-97, ASTM D3475-97, ASTM D3810-97, ASTM D3968-97, ISO 8317
  • Mains or battery-powered
  • RS232 output for easy export of results
  • Multiple measurement units: N, kgf, ozf, mN.m, N.m, lbf.in, ozf.in, kgf.cm, etc
  • Compatible with VectorPro™ Lite data acquisition software

Technical Specifications

  • Load capacity of 500 N (110 lbf)
  • Torque capacity of 10 N.m (90 lbf.in)
  • Container diameter from 10 to 190 mm (0.39″ – 7.5″)
  • Load accuracy is ±1% of full scale
  • 5000 Hz sampling rate

If consistent test speed and reproducibility are a priority, have a look at our Motorised Torque Test Systems, which can also perform CRC tests.

CAPTEST Digital Torque Tester

A TOUGH AND AFFORDABLE DIGITAL CAP TORQUE TESTER FOR MEASURING SCREW CAP OPENING AND CLOSING TORQUE

CAPTEST digital torque tester with Mitutoyo DP-1 VR mini-processor

The CAPTEST is a tough and affordable manual digital cap torque tester, measuring clockwise and anticlockwise torques up to 5 N.m. It can be combined with a printer or statistical mini-processor for regular, repetitive testing of screw-top closures. Its smooth stainless steel housing makes it ideal for clean test environments.

Key Benefits

  • Stores up to 240 peak torque readings
  • Simple controls and clear display
  • RS232 output for easy export of results
  • Lightweight and portable with carry handle
  • Mains or battery-powered
  • 72 hours continuous use between charging
  • IP54-rated stainless steel housing

Technical Specifications

  • Capacity of 5 N.m (44.2 lbf.in)
  • Peak measurement from 0.2 N.m to 5 N.m (1.8 lbf.in to 44.2 lbf.in)
  • Display resolution: 0.01 N.m (0.01 lbf.in)
  • Accuracy better than 1% of full scale
  • Mechanical end-stop overload protection to min. 200% full scale
  • Sampling rate: 250 Hz (continuous mode), 8 or 60 Hz (peak mode)
  • Grip capacity: 15 – 130 mm (5.1 in)
  • Weight: 2.3 kg (5.1 lb)
  • Dimensions: W 180 mm × D 170 mm × H 150 mm (7.1 in × 6.7 in × 5.9 in)

If consistent test speed and repeatability are a priority, have a look at our Motorised Torque Test Systems